The new generation of solid, reliable and robust machinery at the highest level from Belafer such as MAC series brush cutters, accessories and brush cutters for public works. They are within the different definitions that we can give to Public Works and Civil Works, which is none other than to create infrastructures and improve them in all areas for a social good. We cannot forget that in its evolution and transformation over the years in terms of new and ingenious projects, the machinery has been necessary to face them in whole or in part.

We participate as a Company in a part of this improvement and transformation of infrastructures, coupling implements that improve performance, profitability and quality of work in some of its most necessary aspects in a wide variety of machinery.

Tractor Attachable Belafer Crushers for Digging and Pushing

Within the auxiliary services of the Earthworks in land clearings before work, our Crushers attachable to excavation and push tractors (conventional type or Bulldozer) with hydraulic drive systems for pre-cleaning before work, of woody and herbaceous , decreasing the volume of cargo transportation on site. (Opening of jungle paths, stump of trees)

Trituradora Belafer acoplable para tractores

MAC series brush cutters for road maintenance

In road maintenance with tractor or truck equipment. The articulated brushcutters of the MAC series, clear slopes and shoulders in order to minimize risks due to lack of visibility in signaling and the clean maintenance of shoulders on roads and highways.

Desbrozadora articulada serie MAC

Articulated brush cutter with turbo suction

The different routes and increasingly, the prevention of possible fires that may have a negative impact on the environmental impact, are used with turbo aspiration brushcutters so that as the brush is cleared, the material is automatically loaded onto a trailer, preventing areas next to the tracks and in summer times, possible fires are avoided.
Desbrozadora con turbo aspiración

Hedge trimmer, branch trimmer and disc saw are MAC accessories that avoid manual labor

Different equipment within our MAC accessories that are easily attachable to all our models can tackle jobs in verges and medians (hedge trimmers), reduce and cut branches (branch trimmers, disc saw), all in order to avoid manual work and more expensive.

Barra cortasetos

Barbell oleander hedges 1.90 m. For 3 cm cut.

Corta setos para ramas

Barbell oleander hedges 1.90 m. For 3 cm cut.

Sierra de discos

1.60m widia disc saw for branches up to 20cm

Attachable heads for clearing, crushing and earthmoving

Increasingly and in order to complement the excavation and loading works on works, the models of Heads attachable to different equipment and brands of the sector are used, the clearing and crushing of all types of clearings on roads, highways and tracks joins inexorably to that of excavation in order to make more and better profitability of earthmoving equipment.

Cabezales acoplables desbroce y trituracion

Public works machinery for clearing and shredding

Cabezales acoplables para el movimiento de tierras

Attachable heads for earthmoving

Attachable heads for road and highway cleaning

Municipalities, communities and Forest Defense Groups, complement their works teams with different useful machines for cleaning and control within their area of competence. Make the most of the available resources without significant investments in your construction equipment. Maximum adaptation to the needs of the work itself.

Cabezal acoplable para limpieza de carreteras

Cleaning of roads and highways

Heads for cleaning rivers, channels and ditches

Solidarity machinery in the maintenance of water resources, channels, rivers and a host of small ditches. Elimination of muddy deposits and algae that grow in them, allowing once treated to return to its natural state allowing the river channel to be regularized.

We undertake highly versatile equipment that allows large and generous results in the elimination of the material to be treated, avoiding greater impacts in channels that would require greater resources for their treatment by other means.

Cabezales para mantenimiento y limpieza de ríos, canales y acequias

Cabezales para mantenimiento y limpieza de ríos, canales y acequias trabajando

Maintenance and cleaning of rivers, channels and ditches working

Heads to facilitate work in media and construction

The need to facilitate work in any medium or work and to try to minimize the cost of implements in any budget, allow to have implements as they facilitate any maintenance operation in the works of Communities, Construction Companies and Organizations. The work of loading, transporting material, pushing materials, with the Dumper, does not exclude different implements to generate greater added value. Our brand equips different brands of trucks with different articulated equipment for other functions on construction sites.

Cabezales para facilitar el trabajo en medios y obra

The heads to facilitate the work of loading, transporting material and pushing materials

BELAFER range of brushcutters, accessories and heads for Public Works

In the new generation of Belafer MAC series brush cutters for Public Works, we can highlight:

– Safety and reliability at the highest level.

– The design, the steels used, the hardness of the hammers and the rest of their components make our brush cutters effective and reliable tools.

– It is also worth noting the range and power united in perfect synchrony.

The robustness together with the electronic balancing of the rotor allow a very high tangential speed, which facilitates very difficult clearings.

Our machines are ideal for the professional of road, highway, highway, civil and forestry maintenance.

Our Public Works machinery

GREEN MAC 2/4 brush cutter

Mac-2 Green Hydraulic Brushcutter Arms with ranges of up to 5 meters and for tractors up to 100 HP. power. Knife and hammer brushcutter head systems depending on the material to be treated. Fully hydraulic operation through an autonomous system using a multiplier and hydraulic pump that allow you to use only the tractor’s PTO for the full operation of the machine. The models of Mac-2 articulated arm brush cutters can be mounted on tractors with a minimum power of 70 hp.
For specific agriculture and general maintenance jobs. The ranges of the articulated arm range from 3.70 to 4.00 meters.

Desbrozadora GREEN MAC 2/4

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

GREEN’S MAC 2 / B brush cutter

Mac-2B Green Hydraulic Brush Cutter Arms with ranges of up to 5 meters and for tractors up to 100 HP. power. Knife and hammer clearing head systems depending on the material to be cleared. Fully hydraulic operation through an autonomous system using a multiplier and hydraulic pump that allow you to use only the tractor’s PTO for the full operation of the machine. Models of the Mac-2B Green articulated arm brush cutter can be mounted on tractors with a minimum power of 80 hp.
For specific agriculture and vineyard jobs. It is specially designed for municipalities and highways with medium workloads.

Desbrozadora GREEN’S MAC 2/B

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

GREEN MAC 2/5 hydraulic arm brush cutter

The Mac-2/5 Green Hydraulic Arms Brush Cutters with ranges of up to 5 meters of arm and for tractors up to 120 HP. power. Knife and hammer clearing head systems depending on the material to be cleared. Fully hydraulic operation through an autonomous system using a multiplier and hydraulic pump that allow you to use only the tractor’s PTO for the full operation of the machine. Models of the Mac-2/5 Green articulated arm brush cutters can be mounted on tractors with a minimum power of 70 hp.

Desbrozadoras articuladas de brazo hidráulico para mantenimiento de carreteras, autopistas, caminos vecinales, obra civil y espacios verde en general.

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

Hydraulic link articulated brushcutter GREEN MAC 3-TITAN-1

The Mac-3 Titan hydraulic arm brush cutters. They are professional machines for all types of jobs and for all types of tractors. From 80 to 110 CV. With automatic safety systems and hydraulic elements with proportional electronics. State-of-the-art control system allows this type of MAC-3 Titan hydraulic arm brush cutter to make them competitive in work. High quality hydraulic elements with the most complete hydraulic brands on the market have been used in the design of this model.
The arm reaches from the center of the tractor with these models are 5, 6 and 7 meters with the telescopic Mac-3 model. The Mac-3 Titan-V models are machines that are mounted on the center of the tractor, they allow good visibility and are designed for Companies and Organizations with exclusive dedication to this type of clearing job. The assemblies on these models of hydraulic arm brush cutters. They are practically made in the factory under very high standards of quality and safety for the user.

Desbrozadora artículada de brazo hidráulico GREEN MAC 3-TITAN-1

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

Mac-3 Titan-II hydraulic arm brush cutter

The Mac-3 Titan-II hydraulic arm brush cutter models are professional machines for all types of jobs and for all types of tractors from 80 to 140 HP. Automatic safety systems, hydraulic elements with proportional electronics and the latest generation control system allow this type of MAC-3 Titan-II hydraulic arm brush cutters to make them competitive in work. In the design of this model, high-pressure hydraulic elements have been used. quality with the most complete hydraulic brands on the market.
The arm reaches from the center of the tractor with these models are 5, 6 and 7 meters with the telescopic Mac-3 model. The Mac-3 Titan-V models are machines that are mounted on the center of the tractor, they allow good visibility and are designed for Companies and Organizations with exclusive dedication to this type of clearing job. The assemblies in these models of hydraulic arm brush cutters are practically made at the Factory under very high standards of quality and safety for the user.

Desbrozadora de brazo hidráulico Mac-3 Titán-II

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

MAC-3 TITAN-V road brush cutter

The Mac-3 Titan-V models. They are machines that are mounted in the center of the tractor by means of a compact chassis which allows good visibility. For which a study of the manufacturing conformity and a technical project for its legalization are required. They are designed for Companies and Organizations with exclusive dedication to this type of clearing work. The assemblies on these models of hydraulic arm brush cutters are practically made at the factory under very high standards of quality and safety for the user.

Desbrozadora de carreteras MAC-3 TITAN-V

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

MAC-3T-BDK Brush Cutter

El trabajo en carretera y en Obra civil, permite elegir entre una amplia gama de desbrozadoras para el cliente más exigente. El Modelo BDK. Con sistema telescópico permite trabajar en alcances de hasta 7 mt. Los nuevos sistemas de equipamiento tanto de trabajo como de seguridad permiten a la Desbrozadora MAC-3-BDK. Trabajar en un rango de potencias de hasta 70 CV. Bombas de pistones y mandos ergónomicos de una palanca con sistema proporcional para una excelente movilidad en prácticamente todos los movimientos. Versatilidad y seguridad de trabajo. El nuevo modelo se monta también con inversor de refrigeración de serie.

Desbrozadora MAC-3T-BDK

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

MILLENIUM articulated road trimmer

MILLENIUM hydraulic arm brush cutter models are professional machines for all types of work and for all types of tractors from 100 to 140 HP. Automatic safety systems, hydraulic elements with proportional electronics and state-of-the-art control system allow this type of MILLENIUM hydraulic arm brush cutter to make them competitive in work. In the design of this model, high-quality hydraulic elements with hydraulic brands have been used. most complete on the market.

The demand for higher yields

The arm reaches from the center of the tractor with these models are from 5.50 to 6.20.
The articulated brushcutters with hydraulic arm Mac-6 and Mac-8., Together with the V and Millenium models, are the most powerful in the range.
These models are almost exclusively intended for road maintenance. Millennium models are adapted with rear hooks but the arms are located during the clearing work on the side, with visibility and ergonomics at work the predominant part of this model.

Desbrozadora de carreteras articulada MILLENIUM

Articulated brushcutters with hydraulic arm for maintenance of roads, highways, neighborhood roads, civil works and green spaces in general.

CAB-SPC heads for mini excavators from 1,500 to 2,500 kg

The CAB-SPC model is the most used head for mini excavators up to 2.5 t. It is attachable to any type of machine or backhoe or mini excavator with little workload and can be used by users to clean their roads on farms or to clear slopes for maintenance. This head allows the diversity of components and accessories such as skates, rollers, hydraulic front doors and even roller skates for works on verges on the other side of the truck. The transmission by belts place it between one of the top heads for mini excavators of the brand.

Cabezales CAB SPC para mini excavadoras de 1500 a 2500 kg

Ultralight head from 170 to 230 kgs. With interchangeable blade rotor system to hammers. For mini excavators from 1,500 to 2,500 kg.